Compulsive...

Sometimes I have doubts that it's really a strong enough word to describe how I tend to do things to death when the fit takes me. But I now have quite a few needle books to give away as gifts...if I can think of anyone I know who'd actually use them!

This was the first one that set me off. I was sure I could do this better!

The first one was using fabric for the outer face and various off-cuts of felt for the inside. I used scraps of fabric to cover the press stud but when it was all folded up I didn't like the bump the press stud made. I was sure there must be a neater way. Also edging the fabric and felt with bias binding worked but it wasn't something I wanted to have to do every time!

This was my second attempt using only felt.

I like this one with just the felt as material much better. I only needed the sewing machine for attaching the felt sheets in the middle and to attach the inner and outer parts of the needle case together. After that it was all hand sewing. I really liked the back stitch I used for the heart motive on the face but I used blanket stitch on the outer edges and it worked really well. You'll notice the first test using a button closure? Yeah, I ended up removing it because it wouldn't sit straight and I covered a large press stud in felt and sewed it on instead. Again, still don't like the lump the covered press stud makes!

And the cheery Orange Needle Case AND first experiment with button closure!

I felt I was getting closer to what I wanted, so with this one I went ahead and hand sewed a button hole in the top flap. Discovered that it's a good idea to cut the buttonhole first since the chances are pretty good if you cut it after you've sewn around it you will snip the threads...no matter how hard you try not to!

This Needle Case looks pretty good considering how it got chopped and changed about!

With the Star Needle Case I thought I'd see if I could make a button loop closure out of the top flap instead of cutting a buttonhole into it...the quick answer is...No! It pulled the whole thing out of skew and didn't hold the side flaps in as well so I ended up having to cut the flap off and re-sew a new one in, for both sides! The outer one looks much nicer than the inner one since after doing the inner one by hand I realized even I couldn't pull that off as a design element on the outside of the case! So I used the sewing machine. Much better!

Pretty little Busy Bee Needle Case!

So I now had the design I was most happy with. I'd also finally addressed my issues with the inner flaps by adding a hook and eye to latch them together. It bothered me that the flaps may fall open. I cut a long buttonhole in the top flap and blanket stitched closely around it. I made a pretty little bee motif with scraps of felt and plain back stitch and sewed it in the centre of the face and then blanket stitched around the outer edges.

Tatted Motif Needle Case

Now the creative juices were really flowing so I wanted to explore a few different faces. This was one that turned out really nicely. I used one of my medium sized tatted motifs, sewed it onto a pink circle and then back stitched that onto the face. Lovely bold impression without being fussy. Love it!

And finally...Leaf Needle Case!

I could feel the ideas running down though so I knew this one would be the last...for a little while at least! I drew a pattern on the back of the outer cover and cut it out (which turned out to be a MUCH harder job than I ever imagined!) and then back stitched around the design with a piece of black felt behind it. It makes quite a bold impact, doesn't it? I'd do more like it if I can come up with a method of cutting out the design that doesn't drive me crazy! and if I could sew a consistent line around the design that doesn't look like it was sewn by a giddy drunk!

But over all, I really liked these needle cases! Yes, I may be a bit compulsive but at least I now have some lovely gifts to pass on when ever I may need to...so there!

I think my hands have finally recovered from the charity knitting I did so I may pack up the threads again and get out the knitting needles! 

See you all later!

Dx

Okay, Let's Sew!

I've been really interested in making some needle cases lately, mainly because I'm beginning to get overwhelmed with pin cushions! So I've been scanning through Pinterest for ideas and this is what I've come up with so far.

Needle Case Buttoned Up...

I borrowed a bee image off Pinterest and then made it up the way I wanted it in felt and sewed it on a large circle of felt. I think it looks really good and I like the neat running stitches and backstitches I used to put it together instead of blanket stitch, which is more usual. It never seems as neat as I'd like it. I sewed together the body of the needle case (I had to get out my sewing machine which I hadn't wanted to do but there really wasn't any other choice!) attaching the elastic loop at the same time and then inserted the padding to give the strip some body.

...And Unbuttoned!

I used the machine to sew in the felt sheets inside and then sewed around the edges...badly to be honest. I've not used my sewing machine for a while and I couldn't get the tension right and I lost patience. Anyway, it's all together. I hand-sewed on the felt patch with the bee on it and sewed a nice vintage button I had on. 

Ribbon to attach Scissors and Fine Needles.

 After all that, I sat back and admired it (while dishes remained undone and clothes piled up unfolded!) and realized I needed a couple more features. I added a strip of ribbon on the inside of the front cover to tie a small pair of folding scissors...

Back Pocket for Needle Packets.

 I also added a felt pocket at the back to hold the few packets of needles I have as well as a knitting needle size gauge that I also always carry around. I felt it was a very complete little unit now. Just what I wanted.

Felt Inner Sheets for Needles

And of course, a sheet of felt to hold loose needles. 

I like this but I wanted to make something a bit smaller that I could give away as gifts. Something that allowed a bit of creativity but didn't take quite as long as the Bee patch on the first case.

This is what I came up with.

Little Needle Case Shut

 It's a little folded needle case. Really sweet and cute! The fabric part was cut out in one piece with interfacing ironed to it to stiffen it a little.

Little Needle Case Open

On the inside I used two pieces of felt because I wanted to match some of the colours of the outer fabric and I didn't have a piece big enough. I hand sewed everything with fine white crochet cotton so the felt and the fabric are kind of quilted to each other. I sewed two pieces of felt in the centre for needles. I also covered the press-studs with scraps of fabric to make them look neater.

Little Needle Case Face

I sewed the felt flower on the fabric before I sewed anything else to it so the stitching wouldn't show on the inside. And to join the two fabrics I sewed bias binding around the edges. It was really a very neat little design! If I did it again I think I'd copy out the main template on cardboard and use that to trace the pattern onto the fabric required. There are things I'd change and elements that need a bit of fine tuning but over all I really like it! I might even get out the sewing machine and try and work out the tension problem...bit of a task since I think I've lost the manual...of course!

Okay, I think that's it so far. See you all later :)

Dx

Blackwork Handwork

I have had a lot of fun keeping my hands busy with little hand sewing projects and Huzzah! my knitting mojo has returned.  I've cast on to knit a pattern I've done before but everything was wrong with the first incarnation of this garment. Wrong size, wrong needles and wrong yarn. This time around I think I have a much better chance of completing something I like.

But first to the projects I've finished!

I love making pincushions and scissor fobs because they are small, easy to carry around and relatively quick to execute. And since I'm always putting my scissors down and forgetting where I put them, these little attached pincushions make them easier to find amongst all the stuff I tend to surrounding myself with mid-craft. Here they are!

 This is a little Biscornu Pincushion I made with the last bit of pale blue aida cloth. I did the design in really dark brown that looks black. I like the clean crisp lines of the blackwork so I enjoyed doing this. The worst part is always whip stitching the two parts together and stuffing it! Even ironing thin interfacing on the back to stabilize the base material doesn't always help.

This one I like because of the nice effect with the sage green blackwork lines with the golden-yellow french knots in the centre of the flowers.  It's not that complex a design and I think that's one of it's appeal. It translated into a really nice scissor fob too.

 And this last one I decided to make a Pin-Keep. I never knew this sort of thing existed until recently and I kind of made up the design myself. Not the blackwork design. Just the actual Pin-Keep itself. No doubt I've done this wrong but it kind of works the way it's supposed to so I thought it worth the experiment.

I'll have to look up to see if I can find a pattern for these. It's a handy little thing and I'm already beginning to be overwhelmed with pincushions. Blackwork is a wonderful form of embroidery that builds a great design filled with clarity and clean lines.  It was also a nice interlude after intensive knitting. So as I take up my knitting again, I put aside my needles and threads, fine weave cloth and embroidery hoops until next time.

Whenever I pick it up again, it's guaranteed to be fun!

See you all later :)
Dx

Cross Stitch - the Other Obsession!

I've been on a mission to complete as many cute pin cushions as I can while giving my hands a bit of a rest from frenetic knitting...not that I'm not still knitting, just not so much like a machine!
I've been tooling around on Pinterest and there are so many beautiful patterns and projects! I love small motifs, both in cross stitch and black-work because they are so simple, are relatively quick to complete and have huge impact visually because they are so small and cute!
Also I wanted to use an organic cotton thread called Scanfil which has a large selection of lovely colours. Since it's a bit heavier than regular cotton I find it quite suitable to do fine cross stitch and black-work with.
Anyway...I have finished all but one of the designs I downloaded. Here they are in order of completion!

Roses and Bees

This one taught me a few things. That sewing together the two sides SOUNDS easy...but not necessarily in practice! Fortunately I'd followed the pattern and it had this backstitch square sewn around the design and you thread through that so you get a neat edge on the completed item. Very clever :) The brass ring is so you can attach it to your sewing basket or something. A ribbon might have been better but I didn't have any and the rings were just sitting there, so...

Birds and Flowers

These are on even weave fabric and it never occurred to me how tiny the gauge would be until I was pretty much past the point of no return and my eyes were hanging out of my head!  When I downloaded the picture of the design it was hopelessly fuzzy so I drew it all out myself and as close to the original design colours as I could. When I didn't have a colour I needed in the Cotton thread I just used DMC instead. All at 1 strand thickness.

 

Ladybirds and Flowers

...And straight after tiny gauge, back onto usual gauge! Don't ask me what gauge that is, all I know is the previous pin cushion is 6cms square and this one is 8cms square. So, a bit of a difference. I think both designs cover a 50 x 50 graph square. 

Ladybirds and Bees

Back to sort-of tiny gauge. Not quite as bad as the Birds and Flowers one but still pretty small. All Scanfil cotton. I was pretty pleased with this one too. But because of the large piece of base fabric I used that I didn't trim down, folding the edges in was a bit of an irritation!

Ladybirds and Lily Bells
 And my nemesis! The design had lovely white flowers on a pale khaki background. I didn't have any base fabric darker than the cream stuff I'd used on the 8cm pin cushion so I though, "I know, I'll just sew the background the colour I need so the white flowers don't disappear into the cloth. Brilliant!"
Most. Frustratingly. Slow. Design. EVER!!
You don't realize you've  become used to finishing a piece in a specific period of time until you hit something that defies every attempt to hurry it up! It does look very attractive, as a finished project...But I would NEVER do it again!!

Florals and Swirls
And this is my latest finished one. Pretty, cute, little (About 6-7cms square) and finished! I have one more design that I had to redraw out because I couldn't see all the squares to do and it is under way as we speak. But I'm pretty proud of my collection. I'm not really sure what I'm going to do with them all but I have a similar problem with the vast amount of finished knitting projects I have so why should this obsession be any different? Hope you enjoyed my little brag show. See you next time :)
Dx

Finishing Achieved!

Finally!Finallyfinallyfinally! I have TOTALLY finished all the detailing for the cardigans for the twins!
I am so STOKED!!
I've mentioned before that intarsia is not really a technique that I'm comfortable with but I can do it, with a bit of apprehension and gritted teeth. So I am really proud I managed to complete the knitting portion of these cardigans as well as I did.(I might wish they were better but I did my best!)

Two cardigans, knitting all completed and seamed up!

Now for the secondary stage. Detail and finishing! They needed zips for the front but I wanted apple green ones and preferably plastic. After hunting high and low (admittedly mostly on the Internet. Our small town doesn't offer much by way of range.) I ordered 5 apple green plastic zippers from Zipit on etsy www.etsy.com/shop/zipit but that meant they were coming from the U.S. Bit of a bummer but it gave me time to finish the second cardigan because I hadn't started it at that point.

When they came they were much longer than I'd previously thought because I'm a ninny and forgotten that the U.S. is inches and we're cms. 24 inches is quite a bit more than 24 cms. But it all worked out for the best. I just pulled the zip down to where I needed and chopped off the extra length.

Anyway, I hand sewed the zippers in and then hand sewed over the edges (cause I hate the scratchy edges of zipper tape) with cotton bias binding and then as a final touch I sewed two squares of felt of appropriate colour to the top of the zippers so the zipper head can't escape regardless of how hard it's pulled up.

Hand sewn bias binding (I bought that. I'm not that much of a perfectionist!)

And little felt squares at the top so no scratchy teeth against skin and little fingers can't rip the zipper head off!

So all have been duly shown off to recipient Grandmother to ooh! and aah! over (all done exceedingly well!) and have since been posted off to said Grandchildren probably in time to be just the ticket for freezing inland temperatures at night. 

Very pleased with myself :) Not only did I do something for someone else but I also expanded my technical abilities in knitting. Win-win situation!
Have a great day!!