Coin Purses and Felt!

Because I don't have enough mess, right??

But since I had the felt out already I thought I'd try some coin purses...but I didn't have the necessary zips required so I wanted something that I could just shut through a loop or a button...something easy!

                  I knew I'd find it if I looked!

Also I received a lovely order of felt squares in heaps of colours. It's awful but I'd forgotten I'd ordered them and I'll have to look up the order to figure out what the company was I ordered them from but they're perfect for these little purses. The felt is just a bit stiffer than the stuff I have which works great!

I got it!! The felt came from Little Blue Box is located in Perth, WA. I bought it off ebay.

This is the first one I played with before I got the new felt. And while I do like it (it's so cute!!) there were aspects I was sure would improve it. Firstly the two short sides where too low. Coins could (and did!) escape out of the purse in the rough and tumble world of my handbag. Not what I was aiming for, obviously. 

And as a brief side note, the die-cut flower shapes are from bettyoctopus on Etsy . Absolutely scrumptious little things and so many different varieties of shapes attainable depending on how you layer them!

So, now with the new stiffer felt I made some modifications to the original design and tried again!

I was really happy with this one! Even though I had to refine the process as I went along! The pattern was too big to cut out the design in one piece with one piece of felt so I retraced the purse into pieces. The front flap, the bottom flap, the rectangular bottom and the two short sides. Then I had to trace each shape on the felt I chose, twice. For an outer cover and an inner insert. Which meant I had to assemble it a different way to how I'd done the first one. I ended up sandwiching the four pieces of felt (joining two sides which included the inner and outer felt) with a tight running stitch. It actually looks really nice. You can see the layers of colour peeking through.

I also found that while the sides were now high enough, folding the thing down flat was almost impossible because the extra fabric kept wanting to fold over under the top flap when I buttoned it up. Fortunately I hadn't started the blanket stitch around the top edge yet. I found it I scooped out the middle of the short sides, it folded up much better. As you can see from the pic though, not yet perfect...but close!

 And now to the lasted edition! On top of all the other adjustments I'd made up to this point, I also slightly scooped out the rim of the bottom flap. And as you can see above, it folded up pretty much the way it was supposed to! No bump where there's obviously an excess of fabric. And it looks so damn cute!! Lovely bright happy colours! 

I've really enjoyed making these and will definitely be making more. But I thought you'd be interested in the process. Felt is such a wonderful forgiving material and it lends itself to so many beautiful things!

What do you think I should try next?

See you all later!

Dx

Okay, Let's Sew!

I've been really interested in making some needle cases lately, mainly because I'm beginning to get overwhelmed with pin cushions! So I've been scanning through Pinterest for ideas and this is what I've come up with so far.

Needle Case Buttoned Up...

I borrowed a bee image off Pinterest and then made it up the way I wanted it in felt and sewed it on a large circle of felt. I think it looks really good and I like the neat running stitches and backstitches I used to put it together instead of blanket stitch, which is more usual. It never seems as neat as I'd like it. I sewed together the body of the needle case (I had to get out my sewing machine which I hadn't wanted to do but there really wasn't any other choice!) attaching the elastic loop at the same time and then inserted the padding to give the strip some body.

...And Unbuttoned!

I used the machine to sew in the felt sheets inside and then sewed around the edges...badly to be honest. I've not used my sewing machine for a while and I couldn't get the tension right and I lost patience. Anyway, it's all together. I hand-sewed on the felt patch with the bee on it and sewed a nice vintage button I had on. 

Ribbon to attach Scissors and Fine Needles.

 After all that, I sat back and admired it (while dishes remained undone and clothes piled up unfolded!) and realized I needed a couple more features. I added a strip of ribbon on the inside of the front cover to tie a small pair of folding scissors...

Back Pocket for Needle Packets.

 I also added a felt pocket at the back to hold the few packets of needles I have as well as a knitting needle size gauge that I also always carry around. I felt it was a very complete little unit now. Just what I wanted.

Felt Inner Sheets for Needles

And of course, a sheet of felt to hold loose needles. 

I like this but I wanted to make something a bit smaller that I could give away as gifts. Something that allowed a bit of creativity but didn't take quite as long as the Bee patch on the first case.

This is what I came up with.

Little Needle Case Shut

 It's a little folded needle case. Really sweet and cute! The fabric part was cut out in one piece with interfacing ironed to it to stiffen it a little.

Little Needle Case Open

On the inside I used two pieces of felt because I wanted to match some of the colours of the outer fabric and I didn't have a piece big enough. I hand sewed everything with fine white crochet cotton so the felt and the fabric are kind of quilted to each other. I sewed two pieces of felt in the centre for needles. I also covered the press-studs with scraps of fabric to make them look neater.

Little Needle Case Face

I sewed the felt flower on the fabric before I sewed anything else to it so the stitching wouldn't show on the inside. And to join the two fabrics I sewed bias binding around the edges. It was really a very neat little design! If I did it again I think I'd copy out the main template on cardboard and use that to trace the pattern onto the fabric required. There are things I'd change and elements that need a bit of fine tuning but over all I really like it! I might even get out the sewing machine and try and work out the tension problem...bit of a task since I think I've lost the manual...of course!

Okay, I think that's it so far. See you all later :)

Dx